Ku-Band Reception Antenna System

Compliance

ADTH has invested heavily in the development of this antenna system to provide a high quality, low cost solution that is easy to install. The antenna system was developed to comply with the digital standards and the requirement of 2-degree satellite spacing, As more satellites are launched and positioned closer to one another, this is a much needed deterrent to the interference of strong signals transmitted nearby.

Major Features

- Precision Molded Offset Reflector
- Steel Finish Az/El Mounts
- Low Profile Reflector
- Universal (Patio/Side wall) & Flat Roof Mounts Available
- UPS approved packaging for freight cost reduction

Specifications
Vertical Axis 29.53in (75cm)
Horizontal Axis 34.25in (87cm)
Operating Frequency 11.7GHz ~ 12.7GHz
2º Spacing Compliance Yes
Efficiency 73%
Midland Gain 39dB
3db Beamwidth 2.0º
10db Beamwidth 3.6º
First Sidelobe (Typical) 26.5dB
Antenna Noise Temperature at 20º Elevation 33º K
Antenna Noise Temperature at 30º Elevation 30.2º K
Antenna Optical Offset Prime Focus
Mount Type(s) Az/El, Pole, Wall, Roof & Floor
F/D Ratio 0.7
Elevation Adjustment 5º  to 65º
Azimuth Adjustment Range Continuous
Feed Support/LNB Clamps Mono Strut 25mm, 40mm, 50mm, 60mm.